Universal Ovens
![Product Image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-test-150x150.jpg)
![Product Image](https://www.grievecorp.com/wp-content/uploads/2019/12/unv-2-150x150.jpg)
![Product Image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-4-150x150.jpg)
![](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-test-scaled.jpg)
Universal Ovens
Front-to-back horizontal air flow accommodates virtually any oven loading without restricting air passage. Work can be shelf loaded or placed directly on the optional reinforced work space bottom. Designed for baking, drying, preheating.
Universal Ovens Model Specifications:
CAUTION: Ovens processing combustible material are required by National Fire Protection Association 86 Standard for Ovens and Furnaces (NFPA 86) to have a fire suppression system. If flammable solvents or vapors are present in an oven, OSHA requires conformance with NFPA 86 Class A Oven requirements. A powered forced exhauster and other non-standard safety equipment must be added. See Class A Oven Equipment for Solvent Processing resource page, reference our FAQs or contact us us for more information.
Model | Workspace | Outside Dimensions*(WxDxH) | Max Temp | Blower | Heat Input | Insulation Thickness | Operating Characteristics† | Approx Shipping Weight | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions(WxDxH) | VolumeCu Ft | CFM | HP | ElectricKW | GasBTU/HR | Control Accuracy | Temperature Uniformity | Rise Time (Electric) | Rise Time (Gas) | |||||
AA-550 | 24" x 24" x 24" | 8 | 40" x 50" x 36.5" | 550°F | 400 | ⅓ | 5 | Not Rated | 6" | ±0.3% | ±5°F | 45 | Not Available | 965 lbs |
AA-700 | 24" x 24" x 24" | 8 | 44" x 56" x 40.5" | 700°F | 400 | ⅓ | 7 | Not Rated | 8" | ±0.3% | ±6°F | 55 | Not Available | 1,140 lbs |
AA-850 | 24" x 24" x 24" | 8 | 44" x 56" x 40.5" | 850°F | 400 | ⅓ | 9 | Not Rated | 8" | ±0.3% | ±8°F | 70 | Not Available | 1,170 lbs |
AF-550 | 24" x 36" x 24" | 12 | 40" x 62" x 36.5" | 550°F | 400 | ⅓ | 5 | Not Rated | 6" | ±0.3% | ±5°F | 50 | Not Available | 1,155 lbs |
AF-700 | 24" x 36" x 24" | 12 | 44" x 68" x 40.5" | 700°F | 400 | ⅓ | 7 | Not Rated | 8" | ±0.3% | ±6°F | 60 | Not Available | 1,335 lbs |
AF-850 | 24" x 36" x 24" | 12 | 44" x 68" x 40.5" | 850°F | 400 | ⅓ | 9 | Not Rated | 8" | ±0.3% | ±8°F | 75 | Not Available | 1,365 lbs |
AB-550 | 36" x 36" x 36" | 27 | 52" x 62" x 48.5" | 550°F | 600 | ½ | 7 | Not Rated | 6" | ±0.3% | ±5°F | 61 | Not Available | 1,490 lbs |
AB-700 | 36" x 36" x 36" | 27 | 56" x 66" x 52.5" | 700°F | 600 | ½ | 9 | Not Rated | 8" | ±0.3% | ±6°F | 70 | Not Available | 1,850 lbs |
AB-850 | 36" x 36" x 36" | 27 | 56" x 66" x 52.5" | 850°F | 600 | ½ | 12 | Not Rated | 8" | ±0.3% | ±8°F | 83 | Not Available | 1,880 lbs |
AG-550 | 36" x 48" x 36" | 36 | 52" x 74" x 48.5" | 550°F | 600 | ½ | 9 | Not Rated | 6" | ±0.3% | ±5°F | 82 | Not Available | 1,865 lbs |
AG-700 | 36" x 48" x 36" | 36 | 56" x 78" x 52.5" | 700°F | 600 | ½ | 12 | Not Rated | 8" | ±0.3% | ±6°F | 93 | Not Available | 2,230 lbs |
AG-850 | 36" x 48" x 36" | 36 | 56" x 78" x 52.5" | 850°F | 600 | ½ | 18 | Not Rated | 8" | ±0.3% | ±8°F | 110 | Not Available | 2,260 lbs |
* Outside Dimensions
† Operating Characteristics
- Accuracy as percent of controller span.
- Uniformity at 50°F below maximum temperature.
- Rise Time in minutes to 50°F below maximum temperature.
- Tests run with empty oven and minimum exhaust.
- Performance will vary with load and application.
- See Control & Instrumentation Summary for additional details.
Specifications for Universal Ovens
MODEL | AB-700 |
---|---|
MAXIMUM OPERATING TEMP | 700°F |
AIR FLOW | Forced Convection, Front to Back |
CONTROL ACCURACY | ±0.3% |
OVEN UNIFORMITY | ±6°F |
RISE TIME - ELECTRIC | 70 mins |
RISE TIME - GAS | Not Rated |
WORKS SPACE DIMENSIONS (WxDxH) | 36" x 36" x 36" |
SHELVES INCLUDED | 2 |
NUMBER OF SHELVES MAX | 5 |
SHELF CAPACITY | 100 |
MAX LOAD CAPACITY | Not Available |
DOORS | Manual |
LOADING METHOD | Shelf |
APPROXIMATE SHIP WEIGHT | 1850 lbs |
OUTSIDE DIMENSIONS (WxDxH) | 56" x 66" x 52.5" |
![](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-1.jpg)
![product-image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-1-150x150.jpg)
![product-image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-2-150x150.jpg)
![product-image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-3-150x150.jpg)
![product-image](https://www.grievecorp.com/wp-content/uploads/2019/12/CA350-4-150x150.jpg)
Standard Features for Universal Ovens
Certifications
- UL Listed Control Panel
- Meets the Requirements of the Following Standards:
- NFPA 86 (Standard for Ovens and Furnaces)
- NFPA 70 (National Electric Code)
- FM (Factory Mutual)
- OSHA
- Caution:
- When processing combustible material fire protection should be considered
- Processing flammable solvents or vapors requires forced exhaust to provide safety ventilation. For more information see Class A Solvent Processing page at this website
Safety Equipment
- Adjustable manual reset excess temperature interlock to turn off heat on malfunction of main temperature controller
- Separate heating element control contactors to turn off heat on malfunction of main control contactors
- Recirculating blower air flow safety switch to turn off heat on loss of recirculated air flow
- Electrical interlock shuts off heat if power to recirculating blower is interrupted
Controls
- Digital temperature controller
- Motor control push buttons and on-off heat switch
- LED pilot lights
- 5 kA short circuit current rating (SCCR)
Construction
- 208 volt, 230 volt or 460 volt, 3-phase, 60 HZ – other input power available
- All welded construction
- Durable, electrically isolated, Incoloy tubular heating elements
- Heating elements located in heat chamber to prevent radiant heating
- High pressure carbon steel recirculating blower
- Adjustable fresh air intake and 4” diameter exhaust outlet damper
- Channel shelf supports prevent shelves tipping
- Insulated with 10 lbs per cubic foot density rockwool insulation
- 304 stainless steel interior with plated hardware
- Aluminized steel exterior with Trilite Green enamel finish
- Brushed stainless steel control panel face
- Heavy duty doors with explosion venting latches
- Silicone rubber door gasket on 550⁰F models
- Fiberglass door gasket with stainless steel spring insert on 700⁰F and 850⁰F models
- Slip flashing at doorway to allow inner oven to expand without affecting door sealing
- Fully assembled and factory tested for temperature uniformity
- 1 year limited warranty
Modifications & Accessories for Universal Ovens
-
Nickel Plated Carbon Steel Shelf
Oven accessory adding a nickel plated carbon steel shelf with maximum distributed load of either 50lbs 100lbs, or 200lbs depending on the oven model.
-
Stainless Steel Shelf
Oven accessory adding a Stainless Steel Shelf with maximum distributed load of either 50lbs, 100lbs or 200lbs depending on oven model.
-
Integral Oven Legs
Oven modification adding integral oven legs. Includes steel plate shelf.
-
Removable Oven Stand
Oven modification adding a removable oven stand. Includes steel plate shelf.
-
Reinforced Workspace Bottom
Oven modification adding a reinforced workspace bottom of 500 lbs. capacity at removable subway grate; reduces available work space height by 1″.
-
Programmable Temperature Controller
Oven modification adding a programmable Temperature Controller. Microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller.
-Program Parameters: 40 profiles of up to 50 steps each, a real-time clock with battery backup to allow starting profile at any time of day
-Digital Display, 4.3” color touch screen
-Accuracy, ±0.1% of span plus 1 degree display error
-Connectivity, Relay output for alarm or other notification, two (2) USB ports, Ethernet compatible
Also Available:
-Up to four (4) control channels of temperature, relative humidity or vacuum
-Monitor up to16 sensors
-Math and logic functions
-Digital inputs and outputs
-Data logging
-Graphic Trending
-
Digital Timing Temperature Controller
Modification adding a Digital Timing Temperature Controller. Microprocessor based, incorporates 99 hour 59 minute timer, starts timing temperature reaches set point and shuts down oven at end of set time.
- Digital Display, two LED, alphanumeric, 4 digit displays; 0.875″ high for temperature display and 0.500″ high for set point display
- Accuracy, ±0.1% of span plus 1 degree display error
-
Recording Thermometer
Accessory adding a Recording Thermometer. Thermocouple actuated.
- Record: 10″ diameter circular chart 24 hour chart rotation
- Digital Display: 0.56″ high, LED, alphanumeric, 4 digit display; LED status display
- Accuracy: ±0.25%of span plus 1 degree display error
-
SCR Power Controller
Electrical modification adding an SCR Power Controller. Features:
•Silicon controlled rectifier power controllers are completely solid state industrial controllers that ensure precise proportioning of electric power to the heating elements.
•Oven temperature is maintained smoothly and evenly over the entire temperature range of the unit.
•SCR power controllers minimize maintenance, as there are no moving parts or electrical contacts to wear out.
•Heating element fatigue is reduced since the elements do not cool between releases of electric power.
•Zero voltage firing, including the first one half cycle of voltage, minimizes radio frequency and electromagnetic interference.
•Transient voltage suppressor networks are included, and the units are provided with protective fusing.
Custom Ovens
-
Modified Model AB-500 Universal Oven
Serial #: 3903888 port vacuum manifold with separate valve and gauge for curing composite parts in vacuum bags
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 42" x 40" x 50"
-
Modified Model AB-500 Two Compartment Universal Oven
Serial #: 350722Two independent ovens stacked with separate controls and recorders for oven
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 30" x 36" x 36"
-
Modified Model AA-500 Universal Oven
Serial #: 86902C0406Vertical lift door operated by foot pedal. NEMA 12 dust tight, oil tight electrical construction.
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 24" x 24" x 24"
-
Modified Universal Oven
Serial #: 101892A121010′ deep with four doors and four structural steel slide beds to support plastic sheets to heat prior to vacuum forming
- MAX TEMP: 550ºF
- WORKSPACE DIMS (WxDxH): 34" x 120" x 48"
-
Model AA-550 Universal Oven
Serial #: 110810A1213Two stainless steel 300 lbs. capacity roll out shelves for heating heavy dies
- MAX TEMP: 550ºF
- WORKSPACE DIMS (WxDxH): 24" x 24" x 24"
-
Special Universal Air Oven
Serial #: 117487A06161’x 30′ x 1′ for post cure of hose lengths. Guide tracks on floor for customer’s fixture.
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 12" x 360" x 12"